git-annex (5.20140717) unstable; urgency=high

  * Fix minor FD leak in journal code. Closes: #754608
  * direct: Fix handling of case where a work tree subdirectory cannot
    be written to due to permissions.
  * migrate: Avoid re-checksumming when migrating from hashE to hash backend.
  * uninit: Avoid failing final removal in some direct mode repositories
    due to file modes.
  * S3: Deal with AWS ACL configurations that do not allow creating or
    checking the location of a bucket, but only reading and writing content to
    it.
  * resolvemerge: New plumbing command that runs the automatic merge conflict
    resolver.
  * Deal with change in git 2.0 that made indirect mode merge conflict
    resolution leave behind old files.
  * sync: Fix git sync with local git remotes even when they don't have an
    annex.uuid set. (The assistant already did so.)
  * Set gcrypt-publish-participants when setting up a gcrypt repository,
    to avoid unncessary passphrase prompts.
    This is a security/usability tradeoff. To avoid exposing the gpg key
    ids who can decrypt the repository, users can unset
    gcrypt-publish-participants.
  * Install nautilus hooks even when ~/.local/share/nautilus/ does not yet
    exist, since it is not automatically created for Gnome 3 users.
  * Windows: Move .vbs files out of git\bin, to avoid that being in the
    PATH, which caused some weird breakage. (Thanks, divB)
  * Windows: Fix locking issue that prevented the webapp starting
    (since 5.20140707).

# imported from the archive

git-annex (5.20140412) unstable; urgency=high

  * Last release didn't quite fix the high cpu issue in all cases, this should.

# imported from the archive

git-annex (5.20140402) unstable; urgency=medium

  * unannex, uninit: Avoid committing after every file is unannexed,
    for massive speedup.
  * --notify-finish switch will cause desktop notifications after each
    file upload/download/drop completes
    (using the dbus Desktop Notifications Specification)
  * --notify-start switch will show desktop notifications when each
    file upload/download starts.
  * webapp: Automatically install Nautilus integration scripts
    to get and drop files.
  * tahoe: Pass -d parameter before subcommand; putting it after
    the subcommand no longer works with tahoe-lafs version 1.10.
    (Thanks, Alberto Berti)
  * forget --drop-dead: Avoid removing the dead remote from the trust.log,
    so that if git remotes for it still exist anywhere, git annex info
    will still know it's dead and not show it.
  * git-annex-shell: Make configlist automatically initialize
    a remote git repository, as long as a git-annex branch has
    been pushed to it, to simplify setup of remote git repositories,
    including via gitolite.
  * add --include-dotfiles: New option, perhaps useful for backups.
  * Version 5.20140227 broke creation of glacier repositories,
    not including the datacenter and vault in their configuration.
    This bug is fixed, but glacier repositories set up with the broken
    version of git-annex need to have the datacenter and vault set
    in order to be usable. This can be done using git annex enableremote
    to add the missing settings. For details, see
    http://git-annex.branchable.com/bugs/problems_with_glacier/
  * Added required content configuration.
  * assistant: Improve ssh authorized keys line generated in local pairing
    or for a remote ssh server to set environment variables in an
    alternative way that works with the non-POSIX fish shell, as well
    as POSIX shells.

# imported from the archive

git-annex (5.20140320~bpo70+1) wheezy-backports; urgency=medium

  * Updating backport to newest release.
  * Note that this backport does not feature constant time webapp auth token
    comparisons. It's not recommended to use the webapp on multiuser systems,
    since another use may be able to use a timing attack to guess its auth
    token. If you need that, it should not be hard to backport
    haskell-securemem.

# imported from the archive

git-annex (5.20140210~bpo70+2) wheezy-backports; urgency=medium

  * Updating backport to newest release.
  * Remaining differences in this backport:
    - No webdav special remote support.
    - Test suite is not built into git-annex as it now uses haskell-tasty,
      which is not yet backported.
    - No skein hash support.

# imported from the archive

git-annex (5.20131127) unstable; urgency=low

  * webapp: Detect when upgrades are available, and upgrade if the user
    desires.
    (Only when git-annex is installed using the prebuilt binaries
    from git-annex upstream, not from eg Debian.)
  * assistant: Detect when the git-annex binary is modified or replaced,
    and either prompt the user to restart the program, or automatically
    restart it.
  * annex.autoupgrade configures both the above upgrade behaviors.
  * Added support for quvi 0.9. Slightly suboptimal due to limitations in its
    interface compared with the old version.
  * Bug fix: annex.version did not get set on automatic upgrade to v5 direct
    mode repo, so the upgrade was performed repeatedly, slowing commands down.
  * webapp: Fix bug that broke switching between local repositories
    that use the new guarded direct mode.
  * Android: Fix stripping of the git-annex binary.
  * Android: Make terminal app show git-annex version number.
  * Android: Re-enable XMPP support.
  * reinject: Allow to be used in direct mode.
  * Futher improvements to git repo repair. Has now been tested in tens
    of thousands of intentionally damaged repos, and successfully
    repaired them all.
  * Allow use of --unused in bare repository.

# imported from the archive

git-annex (4.20131106~bpo70+1) wheezy-backports; urgency=low

  * Backport is now built against git 1.8.4, also now available in backports.
  * Improve local pairing behavior when two computers both try to start
    the pairing process separately.
  * sync: Work even when the local git repository is new and empty,
    with no master branch.
  * gcrypt, bup: Fix bug that prevented using these special remotes
    with encryption=pubkey.
  * Fix enabling of gcrypt repository accessed over ssh;
    git-annex-shell gcryptsetup had a bug that caused it to fail
    with permission denied.
  * Fix zombie process that occurred when switching between repository
    views in the webapp.
  * map: Work when there are gcrypt remotes.
  * Fix build w/o webapp.
  * Fix exception handling bug that could cause .git/annex/index to be used
    for git commits outside the git-annex branch. Known to affect git-annex
    when used with the git shipped with Ubuntu 13.10.

# imported from the archive

git-annex (4.20130815) unstable; urgency=low

  * assistant, watcher: .gitignore files and other git ignores are now
    honored, when git 1.8.4 or newer is installed.
    (Thanks, Adam Spiers, for getting the necessary support into git for this.)
  * importfeed: Ignores transient problems with feeds. Only exits nonzero
    when a feed has repeatedly had a problems for at least 1 day.
  * importfeed: Fix handling of dots in extensions.
  * Windows: Added support for encrypted special remotes.
  * Windows: Fixed permissions problem that prevented removing files
    from directory special remote. Directory special remotes now fully usable.

# imported from the archive

There was confusion in different parts of the progress bar code about
whether an update contained the total number of bytes transferred, or the
number of bytes transferred since the last update. One way this bug
showed up was progress bars that seemed to stick at zero for a long time.
In order to fix it comprehensively, I add a new BytesProcessed data type,
that is explicitly a total quantity of bytes, not a delta.

Note that this doesn't necessarily fix every problem with progress bars.
Particularly, buffering can now cause progress bars to seem to run ahead
of transfers, reaching 100% when data is still being uploaded.

Still a couple of places that use git config ad-hoc, but this is most of it
done.

Now there's a Config type, that's extracted from the git config at startup.
Note that laziness means that individual config values are only looked up
and parsed on demand, and so we get implicit memoization for all of them.
So this is not only prettier and more type safe, it optimises several
places that didn't have explicit memoization before. As well as getting rid
of the ugly explicit memoization code.

Not yet done for annex.<remote>.* configuration settings.

Should have done this a long time ago.

It compiles. It sorta works. Several subcommands are FIXME marked and
broken, because things that used to accept separate --backend and --key
params need to be changed to accept just a --key that encodes all the key
info, now that there is metadata in keys.

Now that it only contains types used by the backends

Needed for better git annex move --from

had to redo Annex monad's flag storage

enormous reworking

Converted Key to a real data type and caught all the places where I used
an unconverted filename as a key.

Had to loose some sanity checks around whether something is already
annexed, but I guess I can add those back other ways.